A magnetic board for kids bear

Key advantages:

• Suitable for all magnets;
• The magnetic board is padded, making it suitable for uneven surfaces;
• Can be re-positioned without damaging the wall;
• Can be written on with chalk or chalk markers;
• Includes 20 animal magnets;
• Intended for children aged 3 and older; parental supervision is required for earlier use.
• We can custom-make it to your desired size or shape.
  

The set includes:

• Magnetic board – 60×90 cm
• Animal magnets – 20 pcs.
• White chalk marker – 1 pc.
  

1. First, we recommend testing the magnetic strip included in the kit.

Before attaching the magnetic board in its main location, we recommend first testing a small strip on the chosen wall or other surface.

Attach the strip in a less visible area, press it firmly, and leave it for a while. Then carefully remove it and check if the surface is undamaged, if the paint does not peel off, and if the material adheres properly.

This is especially important if the wall has been recently painted, is matte, poorly coated, rough, fragile, or if you are unsure of the paint quality.

2. Prepare the surface for the magnetic board.

Before attaching the magnetic board, choose a flat, clean, dry, and grease-free surface. Painted walls, furniture panels, doors, or other smooth surfaces are best. Clean the area of dust and dirt.

3. Attach the magnetic board.

Remove a portion of the protective film from the adhesive side and begin attaching from the top. Gradually pull the protective film downwards while slowly pressing the magnetic board against the wall.

To ensure the magnetic board adheres nicely and without air bubbles, smooth it from the center outwards using a soft cloth.

4. How to remove the board to change its location?

If you want to change the location of the magnetic board, remove it carefully and slowly. Gently lift a corner and slowly pull the board downwards along the wall, keeping it as close to the surface as possible. Do not pull it sharply towards yourself, as this may damage the paint layer.

If the board is adhering very strongly, the corner can be slightly warmed with a hairdryer. Heat helps to soften the adhesive layer, making it easier to remove the backing. Heat carefully, but do not hold the heat in one spot for too long. The manufacturer or seller is not responsible for damage to the wall.